www.3SAE.com

3SAE Thermal Stripper - Adjustable

Adjustable Thermal Stripper

The 3SAE Thermal Strippers are compact, easy-to-use fiber stripping units designed to thermo-mechanically remove coatings from optical fibers. The heater is adjustable up to 200°C; far hotter than any competing product. This feature facilitates stripping extremely difficult and baked-on coatings and in some cases can even remove fluoroacrylate undercoatings.

Our Adjustable Thermal Stripper supports optical fibers with cladding diameters from 40μm to 1000μm, with buffer diameters up to 1200μm. This includes standard 250μm, 400μm, and 900μm coated fibers. Adjustable temperature and time settings allow it to adapt to stripping a variety of different coatings and cladding sizes.

Product Features

>Compact, low-maintenance bench top design

>Supports cladding diameters from 40μm to 1000μm with buffer diameters up to 1200μm

>Adjustable temperature and time settings to accommodate different fiber coatings

>Available platforms that support Fujikura, Fitel, Ericsson, or use with 3SAE universal clamp

Technical Specs

> Supported Fiber Types:Adjustable: 40 – 1000μm coated

> Supported Fiber Buffers: Adjustable: 80 – 1200μm

> Adjustable Temperature Range: 60 – 200° C, or ambient

> Adjustable Heat Time Range: 0 – 30 seconds (2 second increments)

> Power Source: Input: 100-240VAC, 50/60Hz

> Dimensions: 129.5mm (W) x 73.5mm (D) x 71mm (H) (5.1” x 2.9” x 2.8”) Weight: 445 grams (<1 lb)

Standard Package and Accessories